Basic Products For Construction Work

Construction is the process to construct or repair a house, building, and other architectures. There are some essential tools that are required to construct or repair objects, and architectural things. You can find all the required tools and other products related to construction down below.

Essential Products For Construction Work

Chisel (छैनी)
Head Pan (परात)
Handsaw (आरी)
Ladder (सीढ़ी)
Brick (ईंट)

Measuring Tape (दूरी नापने का फीता)

The measuring tape is used to measure, mark, or transfer distances. It helps to measure the distance between two points in a straight line.

Masonry Trowel (चिनाई करने वाली कन्नी)

A masonry trowel is a hand tool. It helps to spread or place cement, mortar, and other binding materials.

Plumb Bob (दीवार की लम्ब्वत सिधाई का निरिक्षण करने में उपयोग होने वाला उपकरण)

A plumb bob is also known as a plummet. It is a weight with a pointed tip at the bottom. This weight is attached to a string. It checks the vertical alignment of a pillar, wall, etc.

Concrete Float (पलस्तर की सतह को चिकना करने वाला उपकरण)

A concrete float is a hand tool. It has a flat board (made of aluminum and wood) and a handle at the top of the board. It is used to create a smooth surface of the plastered area.

Square (समकोण नापने वाला उपकरण)

A square is used to measure or mark the 90° angle. It has two metallic strips that are fixed at the right angle.

Line Level (सतह के समतलीकरण का निरिक्षण करने वाला उपकरण)

A line level is an instrument. It is used to verify the surface level for the same horizontal plane.

Putty Knife (पुट्टी लगाने वाला चाकू)

The putty knife is used to mix and apply putty on a surface. It has a thin and flat metallic surface that is attached to a handle.

Chisel (छैनी)

A chisel is a cylindrical, square, rectangular, or octagonal-shaped straight tool. It has a cutting edge at its bottom and a hammerhead at its top. It is used in combination with a hammer to cut the stone and concrete.

Hammer (हथौड़ा)

A hammer is an impact tool. It has a weighted head attached to a handle. It is used to deliver impact.

Head Pan (परात)

A headpan is a large bowl-shaped, container. It is used to transport construction materials.

Hoe (फावड़ा)

A hoe is a digging tool. It has a flat metallic head, attached to a long handle at 90°. It is used to dig or place cement, concrete in the head pan.

Drill Machine (गोल छेद करने वाली मशीन)

A drill machine is an electrical tool. It is used to drill round holes in stone, wood, metal, or concrete.

Circular Saw (लोहा तथा लकड़ी काटने वाली मशीन)

A circular saw is an electrical machine. It has an abrasive or toothed circular blade used to cut metal and wood.

Jigsaw (घुमावदार आकृति में लकड़ी व् लोहा काटने वाली मशीन)

A jigsaw is an electrical cutting saw. It is used to cut metal and wood in curved shapes or zig-zag manner.

Stone Cutter (पत्थर काटने की मशीन)

A stonecutter is an electrical machine. It uses a circular toothed blade to cut the stone.

Handsaw (आरी)

A handsaw is a cutting tool. It has a flat-toothed blade attached to a handle. It is used to cut wooden blocks, boards, etc.

Jack Plane (लकड़ी की सतह को चिकना बनाने वाला उपकरण)

A Jack plane is a hand tool. It has a metallic flat surface, a cutting-edge blade in the middle, and a handle attached at the top of the surface. It is used to create a smooth finish on wooden blocks and boards.

Ladder (सीढ़ी)

A ladder is used to climb up or down. It has inclined steps fixed with poles at equal distances.

Brick (ईंट)

A brick is a block, generally made of clay. It is used to build walls, pavements, houses, etc.

Cement (सीमेंट)

Cement is powdered material. It is used to bind the bricks, create plaster on top of bricks, wall surface, etc.

Putty Powder (दीवार के छिद्र भरने वाला चूर्ण)

The putty powder is used to fill holes and create a smooth textured surface. It has high plastic content and texture similar to clay (after adding water to it).

Gum Boots (रबर के जूत)

The gum boots are made of rubber. These are high-ankle boots and protect the feet against cement, mortar, etc.

Mask (नाक व् मुँह ढकने वाला कपड़ा)

Mask is used to cover the nose and mouth. It protects the lungs from cement dust, pollution, etc.

Safety Goggles (सुरक्षा चश्मा)

Safety goggles are used to protect eyes from debris, dust, bright light, etc.

Safety Gloves (सुरक्षा दस्ताने)

Safety gloves are generally made of rubber. Safety gloves are used to protect hands from cement, mortar, rust, etc.

Distance Meter (दूरी नापने का यंत्र)

A distance meter is an instrument. It is used to measure the distance of an object. It uses a laser beam to measure the distance.

Line Laser (समकोण व् समतलीकरण लेज़र यंत्र)

A line laser is an instrument. It projects 2-3 laser beams as perpendicular lines onto a surface. These laser lines are used as a reference, or leveler to build walls, place tiles, etc.

Spade (खुदाई करने का उपकरण)

A spade is a digging tool. It has a slightly curved blade that is attached to a handle. It is used to dig the earth.

Crow Bar (कील निकालने का यंत्र)

A crowbar is a metallic rod bent at a 90° angle at one end. This bent part is flat and has an opening at its front. It is generally used to remove nails.

Screed (ताजा बिछाई कंक्रीट की सतह समतल करने वाला उपकरण)

A screed is a long flat-surfaced tool. It is used to level fresh concrete surface by striking off excess concrete.

Concrete Mixer (कंक्रीट मिलाने वाला उपकरण)

A concrete mixer is a mixing tool. It is used to mix concrete, cement, water, gravel at the construction sites.

Earth Rammer (जमीन की सतह समतल करने वाला यंत्र)

An earth rammer is an impact tool. It is used to level the ground by compacting or compressing the soil.

Wheelbarrow (चिनाई सामग्री ढोने में उपयोग होने वाला उपकरण)

A wheelbarrow is a hand-propelled transport vehicle. It is used to transport cement, concrete, and other construction material.

Arc Welding Machine (आर्क वेल्डिंग मशीन)

The arc welding machine is used to combine metal to metal by melting them using an electric arc.

Tile Cutter (टाइल्स काटने वाला उपकरण)

The tile cutter is used to cut the ceramic tiles in different shapes or sizes.

Jack Hammer (पत्थर व् कंक्रीट की सतह तोड़ने वाला हथौड़ा)

A Jackhammer is a pneumatic impact tool with a chisel at its front end. It is used to break stones, concrete, etc.

Binding Hook (तार ऐंठने वाला हुक)

A binding hook is a metallic rod in the shape of a hook. It is used to bind wire in order to secure iron bars in RCC.

Vacuum Blower (सतह से धुल, मिट्टी हटाने वाला यंत्र)

It is an electric appliance. It propels air out of a tube to clean the surface area.

Safety Harness (सुरक्षा पट्टियाँ)

The safety harness is protective equipment, an attachment between a human being and a stationary object. It is used to secure human beings while working at heights.

Safety Helmet (सुरक्षा टोपी)

The safety helmet is protective headwear. It protects the human head from stones, gravel, etc.