Basic Products For Engraving

The engraving is a process to put a design or pattern on a surface by cutting, drilling or sanding the surface. Engraving on metal, wood, steel, stone, glass, jewellery or leather requires almost the same tools. Here we have listed all the essential and effective tools for engraving.

Chisels (छैनी)

A chisel is a hand tool. It has a sharp cutting edge and a striking head. It is used to cut material from a hard surface by striking the head.

Files (रेत, घिसाई करने के उपकरण)

A file is a hand tool. It is used to sand the surface, or sharp edges to achieve a smooth appearance.

Mallet (लकड़ी/रबर का हथौड़ा)

A mallet is a striking tool. It has a striking head and a handle. Its striking head is normally made of rubber, nylon, or wood.

Gravers (नोंकदार, वक्राकार छैनी)

A graver is a sharp-tip hand-held tool. It is used to cut material from the hard surface.

Scriber (चिह्न लगाने का उपकरण)

A scriber is a hand-held tool. It is used to mark, scribe lines on the surface, or remove material from the surface. It has a sharp pointed tip.

Frame Saw (आरी)

A frame saw is a hand saw with a narrow, flexible blade attached to a frame. It is used to cut small pieces out of a bigger workpiece.

Dremel Machine (ड्रेमेल की नक्काशी करने की मशीन)

A Dremel machine is a rotary tool. It is used for detailed work such as carving and engraving.

Carving Bits (नक्काशी करने की बिट्स)

A carving bit makes holes, deep trenches, or cuts the surface. It is used with a rotary tool.

Stone Burrs (घिसाई करने के पत्थर)

A stone burr is a bit that is used with a rotary tool. It is used to cut, sand, or polish the surface.

Marking Tool (चिह्न लगाने के उपकरण)

A marking tool is a hand-held tool. It is used to mark lines, and points or transfer the measurement ratio from one surface to another.

Clamps (वस्तु पकड़ने के उपकरण)

A clamp is a holding device. It is used to hold an object or a workpiece to perform some work on it.

Sandpaper (रेगमाल)

The sandpaper is made up of abrasive materials. It is used to sand or polish the surface.

Polishing Paste (सतह चमकाने की लुगदी)

The polishing paste is made up of fine abrasive particles. It imparts mirror-like shine to gold, ceramic, metal, etc.

Face Mask (नाक व् मुँह ढकने का कपड़ा)

The face mask is used to cover the nose and mouth to avoid fine dust particulates getting inhaled.

Safety Goggles (सुरक्षा चश्मा)

The safety goggles protect our eyes from dust and debris generated from working on a workpiece.

Gloves (दस्ताने)

The gloves protect our hands from minor knife cuts and injuries.

Table Lamp (मेज पर रखने वाली प्रकाश युक्ति)

The table lamp is used on the table. It converts electricity into light. It is helpful to look at the minor details of the work done on a workpiece.

Sharpening Stone (धार लगाने का पत्थर)

The sharpening stone is made up of abrasive material. It is used to sharpen the edge of cutting tools.

Dust Blower (बारीक मिटटी को हवा से उड़ाने वाला उपकरण)

A dust blower is a tool that pushes air out of a nozzle by compressing its rubber head. It is used to blow dust particles and fine debris from the work surface.

Headband Magnifier (सर पर लगाया जाने वाला वस्तुओं का आकार बड़ा करके देखने का शीशा)

The headband magnifier is a device. It has a magnifier attached to a headband. It is used to look at the minor details of work more preciously.