Basic Products For Spectacles Repair

Spectacles repair requires only minor repairs because the replacement of parts is more cost-effective than their repair. Mostly frame repair and glasses replacement is done in spectacles repair. Here we have listed all the products and tools necessary for spectacles repair.

Essential Products For Spectacles Repair

Nose Pad Popper (नासिका-पैड निकालने वाला उपकरण)
Strong Adhesive (गोंद)

Other Useful Products For Spectacles Repair

Screw Lifting Tool (पेंच निकालने वाला उपकरण)
Filler Wire (चश्मे के ढाँचे को जोड़ने के लिए जोड़ों में भरा जाने वाला तार)

Optical Screwdriver (चश्मा ठीक करने वाला पेचकस)

An optical screwdriver is a tool with a small "+" or "-" shape at its frontend. It has a round head that is attached to the frontend with a shaft. It is used to loose or tighten the screws.

Screw Holding Tool (पेंच पकड़ने वाला उपकरण)

This is a straight tool with a small opening at its frontend (to hold the screws). It is used to place the screw in hard to reach areas of the spectacles frame. The tweezers can also be used to hold the screws in case of not having a screw holding tool.

Flaring Pliers (चश्मा ठीक करने वाला प्लास)

The flaring pliers have two jaws in a "C" shape. It is used to flare out screws, rivets and prevent them from falling out. It helps to adjust frame opening and its degree of closure.

Nose Pad Popper (नासिका-पैड निकालने वाला उपकरण)

Nose pad popper is a tool with two jaws and one jaw with a small opening at its frontend. It is used to pop out or place nose pads.

Strong Adhesive (गोंद)

The strong adhesive is used to fix plastic parts (such as nose pad, earpieces, etc.) of spectacles.

Screw Lifting Tool (पेंच निकालने वाला उपकरण)

A screw lifting tool is a tool with two jaws. One of the jaws has a small opening at its front that is used to lift the screw out of its place. You can also use tweezers to lift out the screw from its place, if screw lifting tool is not available.

Needle Nose Pliers (पतली नाक वाला प्लास)

It has two long nose-shaped jaws and a cutting edge. It is used to hold or cut wires, strips, plastic covers, etc.

Butane Torch (तीव्र ज्वाला प्रज्वलित करने वाला उपकरण)

It is a flame torch that creates high-intensity flames. The flames are created by burning the butane gas. It is used to join metal parts of the spectacles frame.

Filler Wire (चश्मे के ढाँचे को जोड़ने के लिए जोड़ों में भरा जाने वाला तार)

A filler wire is used as glue to join the metallic parts of the frame. A silver filler wire is generally used to join the two metallic parts of a frame.

Nose Pads (नासिका पैड)

It is a piece of plastic, PVC, or rubber that is used to hold the spectacles at the human nose.

Earpieces (कान की डंडियों पर लगने वाले कवर)

The earpieces are the covers of ear sticks (also known as temple tips). It provides a soft base between the ears and temples of the frame.