Basic Products For Welding Kit

November 3, 2020
Welding is a process that is used to join metal to metal by melting them using electric heat. The welding can be metal Arc Welding (MMA), Gas torch welding, or Gas tungsten/metal arc welding (TIG/MIG). Every type of welding requires some tools and machines. Here you can find all the required products to build a welding kit.

Essential Products For Welding Kit

Welding Machine (MMA/MIG,TIG) (वेल्डिंग मशीन)
Gas Cylinder (MIG/TIG) (गैस सिलिंडर MIG/TIG वेल्डिंग के लिए)

Other Useful Products For Welding Kit

Welding Machine (MMA/MIG,TIG) (वेल्डिंग मशीन)

A welding machine is an electrical machine. It is used to generate a spark that can melt the metal.

MMA Electrode (MMA इलेक्ट्रोड)

MMA electrode is a flux coated electrode. It is used as a filler between the joints. It is used in manual metal arc welding (MMA).

Wire Electrode (MIG/TIG) (तार इलेक्ट्रोड MIG/TIG वेल्डिंग के लिए)

The wire electrode is used as a filler between metal joints. A MIG wire electrode is made of metal alloy. It is different from the TIG wire electrode that is made of tungsten.

Gas Cylinder (MIG/TIG) (गैस सिलिंडर MIG/TIG वेल्डिंग के लिए)

For MIG and TIG welding, a CO2 or argon gas cylinder is used to protect the welding against environmental impurities.

Gas Welding Tank (For Gas Torch Welding) (गैस सिलिंडर Gas Torch वेल्डिंग के लिए)

Gas torch welding requires two types of gas cylinders. Oxygen and Acetylene are the most common gases used for gas welding.

Hacksaw (लोहा काटने वाली आरी)

A hacksaw is a hand-held cutting tool. It is used to cut the metal in the desired sizes.

Chipping Hammer (वेल्डिंग अशुद्धियाँ तोड़ने वाला हथौड़ा)

The chipping hammer has two faces. One is chisel-shaped and another is pointed shaped. It is used to remove rust and welding slag.

Angle Fixer Magnet (दो अलग-२ धातु के टुकड़ों को एक साथ पकड़ने में उपयोग होने वाली चुम्बक)

It is a piece of magnet that is used to hold two pieces together for welding.

C-Clamp (धातु के टुकड़ों को पकड़ने वाले क्लैंप)

C-clamp is a "C" shaped metallic clamp with a tightening screw. It is used to hold the objects.

Wire Brush (तार का ब्रश)

The wire brush consists of metallic wire bristles that are attached to a handle. It is used to clean the rust, slag, etc.

Welding Goggles (वेल्डिंग चश्मा)

Welding goggles are protective eyewear. These are used to protect the eyes from the very bright light of the welding spark.

Welding Gloves (वेल्डिंग दस्ताने)

Welding gloves are protective handwear. These are generally made of leather and protect the hands from welding heat.

MMA Electrode Holder (इलेक्ट्रोड पकड़ने वाला उपकरण)

It is used to hold the MMA electrode while welding the workpieces.

Center Punch (निशान लगाने वाला उपकरण)

It is a marking and punching tool. It is used to mark lines, points and create a small dimple in a workpiece (It helps to keep the drill bit in place).

Circular Saw (लोहा काटने वाली मशीन)

A circular saw is an electric cutting machine. It uses a circular toothed or abrasive cutting wheel to cut the metal.

Jig Saw (घुमावदार आकृति में लोहा काटने वाली मशीन)

Jigsaw is an electric-powered cutting machine. It uses a flat toothed blade with reciprocating movements to cut the workpiece in curved shapes.

Angle Grinder (लोहे की घिसाई करने वाली मशीन)

The angle grinder is used to sand or grinds the workpiece. It uses a circular abrasive wheel to grind the workpiece.

Bench Vise (धातु पकड़कर रखने वाला उपकरण)

The bench vise is used to hold the workpiece. It has a fixed jaw and a moving jaw that moves with the help of a screw. It has a fixing plate to fix on top of the work table.

Welding Table (वेल्डिंग मेज)

The welding table can be any simple table with a metallic top. The metallic top is used to provide a conducting surface for welding.

EXPLORE OTHER USEFUL PRODUCTS

व्यास नापने वाला उपकरण (कैलिपर)
नक्काशी करने वाली मशीन
पत्थर काटने वाली मशीन
गतिसूचक (स्पीडोमीटर)
नोंकदार छैनी
राख से बने पत्थर