E-scooter is an electric powered scooter. It is used to cover short distances. Here we have listed all the products to build an e-scooter.
Essential Products For E-Scooter
Scooter (स्कूटर)
Wheel Hub Motor (पहिए की धुरी पर लगने वाली मोटर)
Controller (नियंत्रक प्रणाली)
Throttle (गति नियंत्रक)
Battery (बैटरी)
Battery Charger (बैटरी चार्जर)
Pliers (प्लास)
Screwdriver (पेचकस)Other Useful Products For E-Scooter
Front and Back Forks (आगे व् पीछे का चिमटा)
Front and Back Shock Absorbers (आगे तथा पीछे के आघात अवशोषक)
Front and Back Disc Brakes (आगे व् पीछे के डिस्क ब्रेक)
Speedometer (गतिसूचक)
Cable Ties (तारों को एक साथ बाँधने वाली पट्टियाँ)
Wire Stripper (तार छीलने वाला उपकरण)
Heat Shrink Tubes (ऊष्मा द्वारा सिकुड़ने वाली नलिकाएँ)
Lighter (अग्नि प्रवाहक)Scooter (स्कूटर)
A scooter is normally a kick scooter. It has a platform for the rider's feet and is used to cover short distances. You can choose any standard kick scooter to build an e-scooter.
Wheel Hub Motor (पहिए की धुरी पर लगने वाली मोटर)
It is an electric motor that drives the wheel by consuming electrical power.
Controller (नियंत्रक प्रणाली)
It is a circuit board that controls every electrical signal passed between the motor, battery, and throttle.
Throttle (गति नियंत्रक)
It is a hand-held speed controller that is used to control the supply voltage of the hub motor.
Battery (बैटरी)
A battery is a power bank. It stores DC power in its electrochemical cells.
Battery Charger (बैटरी चार्जर)
It is a circuit board that puts DC power into battery cells. It takes AC power as an input and supplies DC power as an output.
Pliers (प्लास)
A plier consists of two flat jaws. It is used to drive screws, nuts, or to hold an object.
Screwdriver (पेचकस)
It is a straight hand tool. It is used to drive screws.
Front and Back Forks (आगे व् पीछे का चिमटा)
A fork consists of two blades that are joined together at one side. It is used to hold scooter wheels in place.
Front and Back Shock Absorbers (आगे तथा पीछे के आघात अवशोषक)
A shock absorber can be a spring or hydraulic. It is used to absorb shock impulses.
Front and Back Disc Brakes (आगे व् पीछे के डिस्क ब्रेक)
A disc brake consists of a disc and a pair of disc pads. A caliper is used to squeeze the disc pads against the disc to create friction.
Speedometer (गतिसूचक)
It is a gauge that indicates the current speed of the scooter.
Cable Ties (तारों को एक साथ बाँधने वाली पट्टियाँ)
A cable tie is a strip that is used to tie multiple wires together.
Wire Stripper (तार छीलने वाला उपकरण)
A wire stripper is a hand-held tool that is used to peel off the insulation from electrical wires.
Heat Shrink Tubes (ऊष्मा द्वारा सिकुड़ने वाली नलिकाएँ)
These are shrinkable nylon tubes. These tubes shrink in contact with heat. These tubes are used to cover wire joints.
Lighter (अग्नि प्रवाहक)
A lighter is used to generate flames and used to shrink the nylon tubes.