An analog watch is an instrument. It consists of two or three hands (hour, minute, second) and some mechanical gears. It is used to track the time. Here, we have listed all the basic products for analog watch repair.
Essential Products For Analog Watch Repair
Loupe (छोटा आवर्धक शीशा)
Screwdrivers (पेचकस)
Link Remover (घडी के पट्टे की कड़ियाँ निकालने के लिए उपयोग होने वाला उपकरण)
Tweezers (चिमटी)
Watch Hammer (घडी-हथौड़ा)
Needle Nose Plier (पतली चोंच वाला प्लास)
Microfiber Cloth (सूक्ष्म रेशेदार कपड़ा)
Pin Punches (छेद करने वाले उपकरण)Other Useful Products For Analog Watch Repair
Spring Bars (घडी के पट्टे को डॉयल से जोड़ने वाली पिन)
Watch Case Holder (घडी का आवरण पकड़ कर रखने के लिए उपयोग होने वाला उपकरण)
Wrist Measuring Band (कलाई मापने वाला फीता)
Watch Hands Remover (घडी की सुईयाँ निकालने के लिए उपयोग होने वाला उपकरण)
Watch Band Holder (घडी के पट्टों को रखने के लिए उपयोग होने वाला पात्र)
Table Lamp (मेज पर रखने वाली प्रकाश युक्ति)
Safety Gloves (सुरक्षा दस्ताने)Loupe (छोटा आवर्धक शीशा)
A loupe is a small handheld instrument. It consists of a magnifying glass. It is used to look at details of the watch parts.
Screwdrivers (पेचकस)
A screwdriver is a straight tool with a handle. It usually consists of a flat bottom ("-" shaped). But can have "+", hexagonal, or octagonal-shaped bottom. It is used to drive screws.
Link Remover (घडी के पट्टे की कड़ियाँ निकालने के लिए उपयोग होने वाला उपकरण)
It is usually a small "U" shaped apparatus with a movable screw. It is used in combination with pins (can be attached in front of the screw) to remove the bracelet links.
Tweezers (चिमटी)
It is a pair of two metallic strips attached together at one end. It is used to remove, place, or hold watch parts.
Watch Hammer (घडी-हथौड़ा)
A watch hammer consists of a rubber head attached to a straight rod. It is used to strike watch parts to fix them in place.
Spring Bar Tool (घडी के पट्टे को डॉयल से जोड़ने वाली पिन निकालने के लिए उपयोग होने वाला उपकरण)
It is a straight metallic cylinder. It consists of two small pins at both ends. It is used to remove spring bars (The spring bar is used to attach the watch bracelet to the watch).
Needle Nose Plier (पतली चोंच वाला प्लास)
A needle nose plier consists of a pair of thin long jaws pivoted together with handles. It is used to hold, remove, or place watch parts.
Microfiber Cloth (सूक्ष्म रेशेदार कपड़ा)
It is a small piece of fabric. It is made of microfibers and used to clean watch parts.
Pin Punches (छेद करने वाले उपकरण)
A pin punch is a solid straight tool. It is used to remove links, mechanical gears, etc.
Spring Bars (घडी के पट्टे को डॉयल से जोड़ने वाली पिन)
A spring bar is a small metallic cylinder with two pins at its ends. It is used to tie a watch bracelet to the watch.
Watch Case Holder (घडी का आवरण पकड़ कर रखने के लिए उपयोग होने वाला उपकरण)
It is a handheld apparatus that is used to keep the watch in place to open its back cover (using a screwdriver).
Wrist Measuring Band (कलाई मापने वाला फीता)
It is a flexible strap with markings on it. It is used to measure the circumference of a wrist.
Watch Hands Remover (घडी की सुईयाँ निकालने के लिए उपयोग होने वाला उपकरण)
It is a straight mechanical apparatus. It consists of tweezers like the bottom part and a handle. It is used to gently remove delicate watch hands.
Watch Band Holder (घडी के पट्टों को रखने के लिए उपयोग होने वाला पात्र)
It is a container with multiple grooves. It is used to keep multiple watch straps together.
Table Lamp (मेज पर रखने वाली प्रकाश युक्ति)
A table lamp is a light source. It is usually electrically powered. It is used to light up the working area on the table.
Safety Gloves (सुरक्षा दस्ताने)
Safety gloves protect the hands from minor cuts, scratches, debris, shattered glass, etc.